In apps that create lots of scopes (apps with large tables) the uid generation
shows up in the profiler and adds a few milliseconds. Using simple counter
doesn't have this overhead.
I think the initial fear of overflowing and thus using string alphanum sequence
is unjustified because even if an app was to create lots of scopes non-stop,
you could create about 28.6 million scopes per seconds for 10 years before
you would reach a number that can't be accurately represented in JS
BREAKING CHANGE: Scope#$id is now of time number rather than string. Since the
id is primarily being used for debugging purposes this change should not affect
anyone.
If a "replace" directive has an async template, which contains a transclusion
directive at its root node, then outer transclusions were failing to be
passed to this directive. An example would be uses of `ngIf` inside and
outside the template.
Collaborated with @caitp
Closes#7183Closes#7772
When the pattern and ng-pattern attributes are used with an input element
containing a ngModel directive then they should both use the same validator
and the validation errors of the model should be placed on model.$error.pattern.
BREAKING CHANGE:
If an expression is used on ng-pattern (such as `ng-pattern="exp"`) or on the
pattern attribute (something like on `pattern="{{ exp }}"`) and the expression
itself evaluates to a string then the validator will not parse the string as a
literal regular expression object (a value like `/abc/i`). Instead, the entire
string will be created as the regular expression to test against. This means
that any expression flags will not be placed on the RegExp object. To get around
this limitation, use a regular expression object as the value for the expression.
//before
$scope.exp = '/abc/i';
//after
$scope.exp = /abc/i;
Change the error message for a circular dependency to display the full
circle back to the first service being instantiated, so that the problem
is obvious. The previous message stopped one dependency short of the full
circle.
Changes the content of the cdep error message, which may be considered
a breaking change.
Closes#7500
$http was previously checking cookies to find an xsrf-token prior to checking
the cache. This caused a performance penalty of about 2ms, which can be very
significant when loading hundreds of template instances on a page.
Fixes#7717
Sets the ngModel controller property $touched to True and $untouched to False whenever a 'blur' event is triggered over a control with the ngModel directive.
Also adds the $setTouched and $setUntouched methods to the NgModelController.
References #583
Previously, the compiler would throw an error if a directive requested new non-isolate scope
after a directive had requested isolate scope. But it would not error if a directive
requested an isolate scope after a directive had requested a new non-isolate scope.
Since it is invalid to have more than one directive request any kind of scope if one of
them has requested isolate scope, then the compiler should error whatever order the
directives are applied.
This fix addresses this situation by throwing error regardless of order of directives.
BREAKING CHANGE:
Requesting isolate scope and any other scope on a single element is an error.
Before this change, the compiler let two directives request a child scope
and an isolate scope if the compiler applied them in the order of non-isolate
scope directive followed by isolate scope directive.
Now the compiler will error regardless of the order.
If you find that your code is now throwing a `$compile:multidir` error,
check that you do not have directives on the same element that are trying
to request both an isolate and a non-isolate scope and fix your code.
Closes#4402Closes#4421
This adds a scope event notification when a template fails to load.
This can have performance implications, and unfortunately cannot at this moment
be terminated with preventDefault(). But it's nice to be notified when problems
occur!
Closes#5803
When an observer is set to listen on the pattern, minlength or maxlength attributes
via $attrs then the observer will also listen on the ngPattern, ngMinlength and the
ngMaxlength attributes as well.
Closes#7758
Fix property name that introduced a bug that occurs when there are 2 animations per page
with similar signature. Due to mistype they were assigned same cache key so second
animation was processed incorrectly
Closes#7566
Nested isolated transclude directives.
This improves/fixes the fix in d414b78717.
See the changed ng-ifunit test: The template inside ng-if should be bound to the
isolate scope of `iso` directive (resp. its child scope). Not to a child of
the root scope. This shows the issue with ng-if. It’s however problem with
other directives too.
Instead of remembering the scope, we pass around the bound parent transclusion.
This issue was introduced in b87e5fc092.
The state for each row has to be set up *before* linking.
The cloneFn (the function passed into $transclude) is called *before* actual linking and thus it is enough to update the state inside the cloneFn callback.
If a directive provides a template but is not explicitly requesting transclusion
then the compiler should not pass a transclusion function to the directives
within the template.
If you have two directives that both expect to receive transcluded content
the outer directive works but the inner directive never receives a
transclusion function. This only failed if the first transclude directive
was not the first directive found in compilation.
Handles the regression identified in e994259739Fixes#7240Closes#7387
Transitions that are run through ngAnimate which contain a specific property
cause any inline styles to be erased after the animation is done. This has
something to do with how the browsers handle transitions that do not use
"all" as a transition property.
Closes#7503
Expressions that start with `::` will be binded once. The rule
that binding follows is that the binding will take the first
not-undefined value at the end of a $digest cycle.
Watchers from $watch, $watchCollection and $watchGroup will
automatically stop watching when the expression(s) are bind-once
and fulfill.
Watchers from text and attributes interpolations will
automatically stop watching when the expressions are fulfill.
All directives that use $parse for expressions will automatically
work with bind-once expressions. E.g.
<div ng-bind="::foo"></div>
<li ng-repeat="item in ::items">{{::item.name}};</li>
Paired with: Caitlin and Igor
Design doc: https://docs.google.com/document/d/1fTqaaQYD2QE1rz-OywvRKFSpZirbWUPsnfaZaMq8fWI/edit#Closes#7486Closes#5408
The feature has been deprecated in #4317
BREAKING CHANGE: promise unwrapping has been removed.
It has been deprecated since 1.2.0-rc.3.
It can no longer be turned on.
Two methods have been removed:
* $parseProvider.unwrapPromises
* $parseProvider.logPromiseWarnings
If a directives specifies `replace:true` and the template of the directive contains
a root element with an attribute which already exists at the place
where the directive is used with the same value, don't duplicate the value.
Closes#7463
When a event is finished propagating through Scope hierarchy the event's `currentScope` property
should be reset to `null` to avoid accidental use of this property in asynchronous event handlers.
In the previous code, the event's property would contain a reference to the last Scope instance that
was visited during the traversal, which is unlikely what the code trying to grab scope reference expects.
BREAKING CHANGE: $broadcast and $emit will now reset the `currentScope` property of the event to
null once the event finished propagating. If any code depends on asynchronously accessing thei
`currentScope` property, it should be migrated to use `targetScope` instead. All of these cases
should be considered programming bugs.
Closes#7445Closes#7523
This CL enables interpolation expressions to be escaped, by prefixing each character of their
start/end markers with a REVERSE SOLIDUS U+005C, and to render the escaped expression as a
regular interpolation expression.
Example:
`<span ng-init="foo='Hello'">{{foo}}, \\{\\{World!\\}\\}</span>` would be rendered as:
`<span ng-init="foo='Hello'">Hello, {{World!}}</span>`
This will also work with custom interpolation markers, for example:
module.
config(function($interpolateProvider) {
$interpolateProvider.startSymbol('\\\\');
$interpolateProvider.endSymbol('//');
}).
run(function($interpolate) {
// Will alert with "hello\\bar//":
alert($interpolate('\\\\foo//\\\\\\\\bar\\/\\/')({foo: "hello", bar: "world"}));
});
This change effectively only changes the rendering of these escaped markers, because they are
not context-aware, and are incapable of preventing nested expressions within those escaped
markers from being evaluated.
Therefore, backends are encouraged to ensure that when escaping expressions for security
reasons, every single instance of a start or end marker have each of its characters prefixed
with a backslash (REVERSE SOLIDUS, U+005C)
Closes#5601Closes#7517
Calling `$commitViewValue` was was dirtying the input, even if no update to the view
value was made.
For example, `updateOn` triggers and form submit may call `$commitViewValue` even
if the the view value had not changed.
Closes#7457Closes#7495
